Outstanding impregnation on the basis of high-quality, organic substances, after hardening the product is harmless to health upon contact with food products (certified by an external German testing institute). Beginning of protective effect (20°C): 10 - 20 min
A special impregnation which repels water, grease and oil. Used to protect flooring, table tops and working surfaces made of absorbent natural and artificial stone (s.a. marble, Solnhofer stone, sandstone, fine stoneware). For indoors and outdoors. Prevents the stone from staining or makes the removal of spots much easier, the stone remains capable of breathing. The protective effect already begins after some minutes and is fully effective after 2-3 hours. Normally the colour of the stone remains unchanged. Special substances work against a laminar wetting through liquid drops. Ball-shaped liquid pearls which lie only selectively on top of the stone surface, run off the surface. Also suited for cotto, terracotta and terres quites surfaces as well as unglazed clay tiles and bricks.
Technical Data sheet
Preparation: Ensure the surface is completely clean, grease-free, and dry.
Application: Apply the product liberally using a cloth, impregnation pad, or brush.
Large surfaces (floors/facades): Use a low-pressure sprayer, impregnation mop, or roller.
Saturation: Ensure the surface remains wet (saturated) for 15 minutes. Apply extra product if necessary to areas that start to dry.
Buffing dry: After 15 minutes, remove all excess liquid and rub the stone completely dry with a clean cloth.
Curing: Allow the treatment to cure for 24 hours without contact with moisture or rain.