RAPID IMPREGNATOR - 1L

1. Apply undiluted product to a dry and clean surface, thinly and evenly.
2. Let it act for 15 to 20 minutes. (must not dry out, otherwise apply a 2nd layer sooner)
3. Apply a 2nd layer, so that you soak off the first layer again. (on highly absorbent substrates apply several coats wet on wet)
4. Remove excess product from the last layer after approx. 5 minutes with an absorbent cloth and buff the surface completely dry with dry, lint-free cloths.
5. Allow the surface to rest for at least 6 hours before using it again.
6. Consumption: approx. 5 to 20m² with 1 liter.

Click here for the technical data sheet

-