NATURA IMPREGNATOR - 1L
- Stock: In Stock
- Item number: 12045
- Available per piece (full box = 6 pcs)
Select variant
impregnation based on water, free of solvents, no VOC, odourless, environmentally friendly
Water- and dirt-repellent impregnation for the treatment of absorbent natural and artificial stone, cotto, terrazzo and unglazed ceramic tiles. Especially suited for surfaces with residual humidity, mainly outdoors and for the used in polishing lines in the stone industry. The colour will normally not be changed.
Impregnators | |
Solvent / Waterbasis | Water based |
Oleophobic / Hydrophobic | Only water-repellent |
Colourless / Darkener | Transparent |
Preparation:
- Make sure the surface is dry, clean and dust-free. You can clean the surface in advance with AKEMI STONE CLEANER.
- Shake NATURA IMPREGNATOR well for at least one minute before use.
Method:
- Apply a thin layer of NATURA IMPREGNATOR with a soft, lint-free cloth, paint brush, paint roller or impregnating mop. Larger areas may need to be sprayed with pressure.
- Let the NATURA IMPREGNATOR work for 15 minutes. Apply a 2nd layer on highly absorbent surfaces.
- Approx. 20 minutes after the last treatment, remove excess product with an absorbent cloth and scrub the surface thoroughly with dry, lint-free cloths (in circular movements).
In case of insufficient effect or uneven application, re-impregnation can be carried out without any problem. The water-repellent effect develops after approximately 4 – 6 hours, with full effectiveness achieved after approximately 1 week.
We advise you to treat terraces with this NATURA IMPREGNATOR every 2-3 years. Facades every 5 years.
Tools can be cleaned with water before drying.